Dilution Rate: 2.5% (250ml per 10 litres) but 5% (500ml per 10 litres) if dispense system is severely soiled or has been neglected or used for a monthly cleaning regime.
Cleaning: Switch off coolers. Use a Pipeline Professional measuring jug for the correct dilution. Make up cleaning solution in a plastic or stainless steel container or cleaning vessel with cold or warm water (<40c). Pump solution through the dispense head into a white plastic receptacle such as Pipeline Bucket until emergent solution is purple. Soak for minimum of 5 minutes then draw a full line of the discoloured fluid fluid until purple colour is evident. Repeat the process until purple colouration is stable throughout the dispense system. Rinsing: Pump fresh cold water through to dispel all the purple fluid followed by a further litre of water.
- Wear eye protection.
- Wear hand protection.
- Use cap tap for safer dispense.
- Test water purity.