{"product_id":"chemsan-no-rinse-sanitiser-250m","title":"ChemSan No Rinse Sanitiser 250ml","description":"\u003cp\u003e\u003cfont color=\"#000000\"\u003eChemSan No Rinse Sanitiser is an ideal replacement for StarSan in the UK, very similar in composition that does exactly the same job.\u003c\/font\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e\u003cfont color=\"#000000\"\u003eSelf Foaming Sanitiser\u003c\/font\u003e\u003c\/li\u003e\r\n\u003cli\u003e\u003cfont color=\"#000000\"\u003eNot affected by organic soils\u003c\/font\u003e\u003c\/li\u003e\r\n\u003cli\u003e\u003cfont color=\"#000000\"\u003eNo Rinse when used at the prescribed dilution rate\u003c\/font\u003e\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e\u003cfont color=\"#000000\"\u003eA blend of phosphoric acid, benzenesulfonic acid and isopropanol.\u003c\/font\u003e\u003c\/li\u003e\r\n\u003cli\u003e\u003cfont color=\"#000000\"\u003eA self-foaming sanitising solution\u003c\/font\u003e\u003c\/li\u003e\r\n\u003cli\u003e\u003cfont color=\"#000000\"\u003eAn excellent sanitizer for manual application\u003c\/font\u003e\u003c\/li\u003e\r\n\u003cli\u003e\u003cfont color=\"#000000\"\u003eNot recommended on soft metals because of the acid nature of this product.\u003c\/font\u003e\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003e\u003cfont color=\"#000000\"\u003eHow to use:\u003c\/font\u003e\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cfont color=\"#000000\"\u003e\u003cstrong\u003eDilution: \u003c\/strong\u003e0.2%, 10ml to 5 litres of water. Higher concentrations will require a potable rinse. All surfaces should be cleaned and rinsed beforehand. Minimum contact time 2 minutes. The solution should remain at a pH at 3 or below to maintain proper sanitizing level. If using the diluted solution over time, check the Ph regularly using Ph papers.\u003c\/font\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cfont color=\"#000000\"\u003e\u003cstrong\u003eHand Utensils, Tanks, Vats, Homebrew use: \u003c\/strong\u003eScrape or pre-clean dirty surfaces. Clean all surfaces using a suitable detergent, following label directions. Rinse with potable water. Apply diluted solution on surfaces with a cloth, mop ,brush, sponge, spray or by immersion. After 2 minutes contact time, drain solution thoroughly. For all applications, allow to air dry, however surfaces must remain wet for at least two minutes. Do not rinse after Chemsan application.\u003c\/font\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003e\u003cfont color=\"#000000\"\u003eSafety:\u003c\/font\u003e\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cfont color=\"#000000\"\u003e\u003cstrong\u003eDanger – Contains Phosphoric Acid. \u003c\/strong\u003eKeep out of reach of children. Wear protective gloves\/protective clothing\/eye protection\/face protection. \u003c\/font\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cfont color=\"#000000\"\u003e\u003cstrong\u003ePrecautions –\u003c\/strong\u003eHarmful if swallowed. Corrosive to skin and eyes. Do not get in eyes, on skin or on clothing. Wear protective goggles and clothing when using. Avoid contamination of food.\u003c\/font\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cfont color=\"#000000\"\u003e\u003cstrong\u003eDO NOT MIX CHEMSAN WITH CHLORINATED CLEANERS AS \u003c\/strong\u003e\u003cstrong\u003eCHLORINE GAS WILL RESULT. \u003c\/strong\u003e\u003c\/font\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cfont color=\"#000000\"\u003eDo not use or store near heat or open flame.\u003c\/font\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cfont color=\"#000000\"\u003eSee label for more precautionary information.\u003c\/font\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cfont color=\"#000000\"\u003e\u003cstrong\u003eIf in eyes: \u003c\/strong\u003eHold eyes open and rinse slowly and gently with water for 15-20 minutes. Remove contact lenses, if present, after the first five minutes. Then continue rinsing. Get immediate medical attention\/advice.\u003c\/font\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cfont color=\"#000000\"\u003e\u003cstrong\u003eIf swallowed: \u003c\/strong\u003eGet immediate medical attention\/advice. Have person sip on a glass of water if able to swallow. Do not induce vomiting unless told to do so by the Poison Control doctor. Do not give anything to an unconscious person.\u003c\/font\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cfont color=\"#000000\"\u003e\u003cstrong\u003eIf on skin or clothing: \u003c\/strong\u003eTake off contaminated clothing. Rinse skin immediately with plenty of water for 15-20 minutes. Get medical attention\/advice if needed.\u003c\/font\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cfont color=\"#000000\"\u003e\u003cstrong\u003eIf inhaled: \u003c\/strong\u003eMove person to fresh air. If person is not breathing call an ambulance, then give artificial respiration, preferably mouth-to-mouth if possible. Get immediate medical attention\/advice.\u003c\/font\u003e\u003c\/p\u003e","brand":"ChemSan","offers":[{"title":"Default Title","offer_id":63802168770937,"sku":"B2B-3317","price":8.45,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0058\/7756\/3507\/files\/0fullx44aj4.jpg?v=1781863748","url":"https:\/\/brew2bottle.co.uk\/products\/chemsan-no-rinse-sanitiser-250m","provider":"Brew2Bottle","version":"1.0","type":"link"}